+1 (888)976-SING
Menu

In stock

UHF-BBSI0 Rock-N-Roll Wireless Microphone

SKU: UHF-BBSI0 Category:
Share:

The Acesonic BBS-i30 Rock-N-Roll Wireless Microphone is a unique device for those looking for the best quality sound and the ability to use the microphone and stand as a prop in your performance. With its stylish design and bright colors, this microphone is for you! The bottom of the stand is equipped with a spherical bearing that allows the stand to swivel all around and will return to a standing center position when let go. The microphone is wireless so cables won’t get in the way as rock out on stage. Two different bases are available. The stand can either be bolted to a stage floor with the included base for a permanent installation, or use the optional heavy base (sold separately) to hold things down during performances and still can be moved from place to place after. Microphones are available in orange, purple, and red.

Features:

  • Correction of frequency response tailored for vocals, with brightmidrange and bass rolloff
  • Consistent with heart-shaped directivity able to isolate the mainsound source and try to reduce the background noise
  • Pneumatic shock mount reduces handling noise
  • Effective built-in spherical windshield and BOP cover
  • Cardioid (unidirectional) dynamic
  • Frequency response: 50 to 15,000 Hz
  • Sensor Type: moving coil
  • Polar Pattern: heart-shaped
  • Frequency response: 50 Hz – 15 kHz
  • Sensitivity (1 kHz): -54,5 dBV / Pa / 1,88 mV / Pa
  • Weight:
    • Microphone: 3.4lbs
    • Stand: 9.84lbs
    • Installed Base: 2lbs
    • Mobile Base: 29.7lbs

Specifications:

Wireless Receiver:

  • Frequency oscillation mode PLL phase-locked frequency synthesizer
  • Practical input 6dBuV – 10dBuV sensitivity, S / N> 80dB
  • Frequency stability ± 0.005% (-10°C ~ 50°C)
  • Maximum Deviation ± 48KHz
  • Signal-to-noise ratio> 105dB (1KHz-A)
  • Composite T.H.D <0.5% @ 1KHz
  • Frequency response 50Hz ~ 18KHz
  • The maximum output voltage 12dBV ~ 15dBv
  • Audio output impedance 2.2KΩ
  • Audio output interface 2 XLR Balanced Socket
  • Display LCD + LED
  • Power supply 12V DC – 1.25A

Handheld Microphone:

  • Frequency oscillation mode PLL phase-locked frequency synthesizer
  • Output power <50mW or 30mW 50mW ≤ switchablee
  • Harmonic radiation <-60dBcc
  • Maximum Deviation ± 48KHzz
  • Maximum output sound pressure 140dB SPLL
  • 2 Battery No. 5 (AA) batteries required
Related Products