No Longer Available
Product Information For Reference Only
The Acesonic UHF-5800 Dual Wireless Microphone System is designed to bring you professional and reliable operation in one easy package. Avoid interference by being able to scan through 100 channels for open frequencies in your area before use! The diversity of operation will continuously scan the A side and B side of the antennas for each microphone ensuring you’re getting the strongest signal possible. Instead of repeatedly pressing buttons on the receiver and microphone to match frequencies, the channel can be sync’d to both the microphone and receiver via IR. Wireless microphones couldn’t be any easier to use with this system!
If you’re using this microphone in a small room, you can set the microphones to transmit at only 5mw of power to extend battery life. For larger areas, you can double up transmitting power and set it at 10mw to extend the range. Another userful feature is that you can manually set the frequency on each microphone after you scanned with the receiver. This is a useful function when you’re not close enough to do an IR sync. This is perfect in professional environments where receivers are housed in one central location but microphones are scattered throughout your venue. You can just share what the frequency channels are instead of bringing the microphones up to the receivers to perform IR syncs.
Here’s how easy it is to set up:
- Press “Scan” on the receiver on the left side to begin pairing the 1st microphone. This will scan all available frequencies and select the best one.
- After a channel is found, remove the bottom cover on the first microphone by twisting it off and face the IR sensor towards the receivers IR sensor.
- Hit the “ACT” button on the receiver and channel will be sync’d between both devices.
- Repeat the same on the 2nd microphone using the controls on the right side of the receiver.
Features:
- The best solution for home entertainment or professional performances
- Automatic frequency scanning and automatic transmitter setup
- Diversity of operation gives you the most reliable performance possible
- Features Infrared technology with RF power, Internal Channel selector and Battery Power status indicator
- Multi-Functional and User Friendly receiver
Specifications:
System
- Channel: 100 Channels
- Frequency Range: 810 – 860MHz
- Frequency Response: 35Hz – 20KHz
- Bandwidth: <200KHz
- T.H.D.: <0.5%
- S/N Ratio: >90dB
- Dynamic Range: >100dB
- Working Distance: 150 ft.
Receiver
- Sensitivity: 2.0uV
- Oscillation Mode: PLL
- S/N Ratio: >90dB
- Distortion: <0.5%
- Output: 2 Balanced and 1 6.35mm Mixed
- Power: DC 14 – 22V
Transmitter
- Transmission Power: 10mW / 5mW
- Oscillation Mode: PLL
- Image Controlment: >50dB
- Adjust Frequency Deviation: <75KHz
- Channel Switch Mode: Coding Switch
- Power: DC 2.4 – 4.8V
Package includes:
- UHF-5800 Receiver
- 2 Wireless Microphones
- 2 Antennas
- Audio Cable
- Power Cord